Whether you are getting a replacement or an entirely new installation, there are a few common steps that are involved when you install an air conditioner (AC).
At Service Minds One Hour Air Conditioning & Heating in Bradenton, you can get Florida’s best heating, ventilation, and air conditioning (HVAC) services.
Our dedicated HVAC technicians can evaluate your home and determine the best standard AC installation for your situation.
Key Takeaways: What Is Usually Included in Your AC Installation?
- The HVAC technician will evaluate your home for ductwork requirements and determine your capacity needs.
- Any old HVAC equipment will be removed. Then, the site will be prepared for the installation.
- Depending on your previous system and existing ductwork, new ductwork may need to be installed.
- The entire process takes around four to eight hours.
- Afterward, the HVAC technician will remove their equipment and carefully clean the site.
To ensure long-lasting results, remember to schedule an AC maintenance appointment at least once a year.
What Happens During a Standard AC Installation
While you can do your own research about AC installations, it’s a good idea to consult with one of our HVAC technicians before you select a specific unit. You need to consider the AC’s capacity, energy needs, ductwork requirements, and other factors. By working with Service Minds One Hour Air Conditioning & Heating, you can ensure the best results from the installation process.
Home Evaluation and AC Consultation
The first step in the process is the home evaluation. During this step, we will take a look at your home’s layout and your current AC unit. We’ll also talk to you about your preferences.
For example, some people have a home office that they spend time in during the day. Because of this, they may want to have a separate air conditioning setup for their office or a zoned system. Alternatively, you may want to get a heat pump if you need a new heating system as well.
During the evaluation, we will consider the following factors.
- Climate
- Space requirements
- Manufacturer
- Type of cooling system
- Personal preferences
- Existing insulation and drafts
- Budget
- Ductwork requirements
Energy-Efficiency Options
In the United States, A typical air conditioner uses 12% of the household’s energy consumption. As a result, your air conditioner can greatly contribute to your electricity costs. To help you save money, our HVAC technician will review energy-efficient options and work with you to find the best choice for your family’s needs.
Load Calculation
Your HVAC system’s size and capacity need to be just right for your home. If the AC is oversized, it will reach the right temperature too quickly and shut off. Frequent cycling can cause it to wear out prematurely. Similarly, an AC that is too small will wear out early because it will have to run continuously. By calculating the appropriate capacity, your HVAC technician can ensure your AC has the best energy efficiency, comfort, and longevity possible.
Ductwork Inspection
Around 25% to 40% is lost through your ductwork. Because of this, your HVAC technician will inspect your existing ductwork for signs of pinhole leaks and gaps. Then, they’ll recommend the best repairs or replacement options. Additionally, the technician will determine if your ducts are large enough for your new AC installation.
Some homes don’t have any existing ductwork. If this is the case, the HVAC technician can discuss whether it makes more sense to install new ducts or to opt for a ductless cooling system.
Site Preparation
On the day of the standard AC installation, our HVAC technician will arrive on time and ready to prepare the site. If you have an old air conditioner, they will remove it and clean up the installation area.
Then, the HVAC technician will bring in all of the materials that are required to complete the job. For example, they may need to set up a concrete or composite pad for the outdoor unit’s base.
Installation
Before the installation work begins, the technician will turn off your electricity and gas lines. They will cover up or move your furniture and belongings, so they don’t become damaged during the installation process.
Afterward, the technician can begin the installation work. From start to finish, a standard AC installation normally takes only four to eight hours to complete. During this process, the HVAC technician will generally work through the following steps.
- Mount the indoor unit or evaporator coil.
- Place the drain pan above the furnace.
- Set the copper refrigerant line.
- Install the condenser on the pad before wiring it to the electrical disconnect.
- Attach and weld the line set to the service valve.
- Install the liquid line filter drier between the condenser and the expansion valve.
- Connect the wiring to the electrical panel.
- Set up the condensate drain line to remove condensation from the AC.
Clean Up
Once the air conditioner has been installed, the technician will quickly work to clean up the installation site. They will remove any drop cloths and pick up their equipment. Finally, they will sweep up any remaining dust or debris.
Get Help With Your AC Installation in Bradenton
If you live in Bradenton, our team of HVAC technicians can help with your standard AC installation. We’re on time or you don’t pay a dime! From start to finish, we’ll ensure a stress-free installation process. To learn more, give us a call today.